Skip to main content

SCAFFOLDING

 





WEAR SAFETY HARNESS ON SCAFFOLDING OR WHEN WORKING AT HEIGHTS ABOVE 2.0 METERS


SCAFFOLDING


Scaffolding is a temporary structure that is used to provide a safe working platform for construction workers. It is important to follow safety procedures when using scaffolding to prevent injuries.

Falls are the leading cause of injuries on scaffolding. To prevent falls, workers should always use fall protection when working at heights greater than 2 meters. Fall protection can include guardrails, safety nets, or personal fall arrest systems.

Scaffolding must be erected and maintained by a competent person.

A competent person is someone who has the knowledge and experience to ensure that the scaffolding is safe to use. The competent person should inspect the scaffolding before each use to make sure that it is in good condition and that all components are properly secured.

Scaffolding must be used in accordance with the manufacturer's instructions. The manufacturer's instructions will provide specific information on how to erect, use, and dismantle the scaffolding safely.

Scaffolding must be kept free of debris and obstacles. Debris and obstacles can create tripping hazards and make it difficult to move around on the scaffolding.

Scaffolding must be properly lighted. Scaffolding must be well-lit so that workers can see what they are doing and avoid tripping or falling.

Scaffolding must not be overloaded. Scaffolding must be designed to support the weight of the workers, materials, and equipment that will be used on it.

Scaffolding must not be used in high winds. Strong winds can make scaffolding unstable and dangerous.

Scaffolding must not be used in wet or icy conditions. Wet or icy conditions can make scaffolding slippery and dangerous.

Workers must be trained in scaffolding safety procedures. Workers should be trained on how to erect, use, and dismantle scaffolding safely. They should also be trained on how to use fall protection and other safety equipment.

SAFETY TIPS:

1) Always wear a hard hat when working on scaffolding.

2) Use non-slip footwear.

3) Keep the working area clean and free of debris.

4) Do not overload the scaffold.

5) Do not climb on the scaffold if it is wet or icy.

6) Do not use the scaffold if it is damaged or unstable.

7) If you see a safety hazard, report it to your supervisor immediately.

By following these safety tips, you can help to prevent injuries and accidents when working on scaffolding.

 

SCAFFOLD ERECTING:

1.  Plan the job. Before you start erecting the scaffolding, you need to plan the job carefully. This includes considering the following factors:

a) The height of the scaffold

b) The weight of the materials you will be working with

c) The type of work you will be doing

d) The weather conditions

e) The availability of materials and equipment

 

 

 

2.  Choose the right type of scaffolding. There are many different types of scaffolding available, so you need to choose the right type for the job. Factors to consider include the height of the scaffold, the weight of the materials you will be working with, and the type of work you will be doing.

3.  Inspect the scaffolding before use. Once you have chosen the right type of scaffolding, you need to inspect it carefully before use. This includes checking for any damage or defects. If you find any damage or defects, you should not use the scaffolding until it has been repaired or replaced.

4.  Erect the scaffolding safely. When erecting the scaffolding, you need to follow the manufacturer's instructions carefully. You should also use the correct safety equipment, such as hard hats, safety glasses, and fall protection.

5.  Use the scaffolding safely. Once the scaffolding is erected, you need to use it safely. This includes following the following safety tips:

a) Never overload the scaffolding.

b) Never stand on the edges of the platforms.

c) Never climb on the braces.

d) Never work alone.

e) Always wear the correct safety equipment and PPE.

 

DISMANTLE SCAAFOLDING:

This includes following the manufacturer's instructions carefully. You should also use the correct safety equipment, such as hard hats, safety glasses, and fall protection.

Here are some additional safety tips for working on scaffolding:

1) Keep the working area clean and free of debris.

2) Ensure you Tied back any loose clothing or hair.

3) Be aware of your surroundings and avoid distractions.

4) Do not overload the scaffolding.

5) Use the correct ladders and walkways.

6) Do not climb on the braces.

7) Always wear the correct safety equipment.

8) Never work alone.

INSPECTION OF SCAFFOLDING:

a) Inspect the scaffolding before each use. This is especially important if the scaffolding has been exposed to weather or other hazards.

b) Look for any signs of damage, such as cracks, loose boards, or missing hardware. If you see any damage, do not use the scaffolding until it has been repaired or replaced.

c) Make sure that the scaffolding is level and stable. If it is not, do not use it.

d) Check the access to the scaffolding. Make sure that there are safe and secure ladders or stairs leading to the platform.

e) Make sure that the guardrails and toe boards are in place. These safety features help to prevent workers from falling.

f) Check the work area around the scaffolding. Make sure that there is no tripping hazards or other hazards that could pose a risk to workers.

If you find any problems with the scaffolding, do not use it until they have been corrected. Scaffolding is a serious safety hazard, and it is important to take all necessary precautions to ensure that it is safe to use.

g) Use a checklist. A checklist can help you to ensure that you have inspected all of the important safety features.

h) Have someone else inspect the scaffolding with you. A second pair of eyes can help you to spot potential hazards that you may have missed.

i) If you are not sure whether the scaffolding is safe to use, do not use it. It is better to be safe than sorry.

By following these tips, you can help to ensure that scaffolding is safe for use.

 

 

 

TRANSPORTING SCAFFOLDING:

TRANSPORTING SCAFFOLDING:

1.  Use the right vehicle. You will need a vehicle that is large enough to accommodate the scaffolding, and that has a strong enough suspension to handle the weight. A van or truck with a flatbed is ideal.

2.  Secure the scaffolding properly. Use ratchet straps or other secure ties to tie down the scaffolding to the vehicle. Make sure that the scaffolding is securely fastened in all directions, so that it cannot move around during transport.

3.  Load and unload the scaffolding carefully. Do not overload the vehicle, and be sure to use proper lifting techniques when loading and unloading the scaffolding.

4.  Follow the manufacturer's instructions. The manufacturer of your scaffolding should provide specific instructions for transporting it safely. Be sure to follow these instructions carefully.

5.  Be aware of the weather conditions. Do not transport scaffolding in wet or icy conditions. The scaffolding could become slippery and difficult to control.

6.  Be aware of your surroundings. Be sure to drive carefully and be aware of other vehicles on the road. Do not transport scaffolding on busy roads or in areas with a lot of traffic.

SAFETY TIPS:

a)  Make sure that the scaffolding is clean and free of debris before transporting it. This will help to prevent accidents and damage to the scaffolding.

b) If you are transporting scaffolding a long distance, consider hiring a professional scaffolding company. They will have the experience and equipment necessary to transport scaffolding safely.

c) Always obey the speed limit and traffic laws when transporting scaffolding.

d) Be sure to have a first-aid kit and fire extinguisher in your vehicle in case of an emergency or accident.

 

 

ADD A NOTICE BOARD TO SCAFFOLDING TO INDICATE IT IS SAFE TOM USE OR UNSAFE

ADD NOTICE BOARD OR TAGGS TO INDICATE IF THE SCAFFOLDING ARE SAFE OR UNSAFE TO USE.


THIS TAG ARE ADDED TO SCAFFOLD WHEN IT IS UNSAFE OR INCOMPLETE TO USE

OK TAG MEANS IT IS SAFE TO USE SCAFFOLDING



 

 

 

EXAMPLE OF CHECKLIST:

Date:

Location:

Inspector:

GENERAL:

Is the scaffolding properly erected and maintained?

Are all components in good condition?

Are there any loose or damaged parts?

Is the scaffolding level and plumb?

Are there any tripping hazards?

Is the area around the scaffolding properly secured?

GUARD RAILS:

   Are guardrails in place on all open sides and ends?

Are the guardrails the proper height?

Are the guardrails securely attached?

TOE BOARDS:

Are toe boards in place where required?

Are the toe boards the proper height?

Are the toe boards securely attached?

ACCESS:

Are there safe and accessible means of getting on and off the scaffolding?

Are ladders properly secured?

LOADING:

Is the scaffolding properly loaded?

Is the load evenly distributed?

Is the load within the capacity of the scaffolding?

WEATHER:

Is the scaffolding safe to use in the current weather conditions?

OTHER:

Are there any other hazards that need to be addressed?

Comments:

Inspector's Signature:

Date:

Comments

Popular posts from this blog

FIRE-SAFETY

  SOME FACTS: Estimated 180 000 deaths occur every year caused by burns worldwide (WHO) the vast majority occur in low- and middle-income countries. Non-fatal burn injuries are the leading cause of morbidity. Burns occur mainly at home and in the workplace.  Burns are preventable. A burn is an injury to the skin or other organic tissue primarily caused by heat or due to radiation, radioactivity, electricity, friction or contact with chemicals. Thermal (heat) burns occur when some or all of the cells in the skin or other tissues are destroyed by: Hot liquids (scalds/steam) Hot solids (contact burns) Flames (flame burns) Radiation (UV rays/sunburn) PREVENTION: Enclose fires and limit the height of open flames in domestic environments. Promote education regarding stoves, open fires, loose clothing and fuels. Apply safety regulations to housing designs and materials and encourage home inspections. Impro...

EMERGENCY ASSEMBLY POINT

  During a workplace disaster, such as a fire or an earthquake, an assembly point is a specified spot where personnel can meet to ensure that everyone  is accounted for and to receive additional instructions. In the event of a workplace emergency Disorder can raise additional safety concerns.   1) Assembly Area Requirements: The primary purpose of an evacuation is to allow people to safely escape the emergency site and transport them to a more secure place known as the assembly area.  If there is no pre-planned destination at the end of the evacuation, confusion, fear, and additional risks can occur. It could potentially put individuals in danger again, or worse, impede emergency response efforts.  Keep in mind that not all areas around your business are judged safe for evacuees to occupy during an emergency procedure. Here are some emergency assembly area requirements to guide you in picking the safest assembly area for your tenants and staff. 2) Distan...

CPR (CARDIOPULMONARY RESUSCITATION)

  CPR (CARDIOPULMONARY RESUSCITATION) NOTE: DO NOT PERFORM ANY MEDICAL PROCEDURE WITHOUT TRAINING OR CERTIFICATION] Despite technological advances and new scientific discoveries, heart disease remains the number one cause of death globally, with 17.3 million deaths per year.   HEART Before   you   learn   how   to   perform   CPR,   it’s   important   to   understand how   the   heart,   lungs,   brain and cells perform. The heart consists of four chambers, the right and left atria (singular: atrium) and the right and left ventricles. The atria are located above the ventricles, as can be seen in the above diagram. The heart is a muscular organ supplied by the coronary arteries. It is located below your breastbone (sternum) and, in an adult, is approximately the size of your fist. The heart pumps blood that has been deoxygenated after supplying the body’s tissues into ...